| Air Compressor, 5.5hp Gas Honda – 02-003 | $48.00
(2hr) | $55.20 | $276.00 | $828.00 |  |
| Air Compressor, Electric – 02-004 | $31.20
(2hr) | $35.40 | $177.00 | $531.00 |  |
| Backhoe Loader, Terex – 24-002 | $360.00
(4hr) | $360.00 | $1,800.00 | $5,400.00 |  |
| Bander, 3/4″ Metal – 28-021 | $36.00
(2hr) | $36.00 | $120.00 | $360.00 |  |
| Bobcat 68″ Toothed Bucket – 24-.36 | $42.00
(4hr) | $42.00 | $210.00 | $630.00 |  |
| Bobcat 80″ Toothed Bucket – 24-037 | $42.00
(4hr) | $42.00 | $210.00 | $630.00 |  |
| Bobcat Auger Attachment – 24-021 | $60.00
(4hr) | $72.00 | $360.00 | $1,080.00 |  |
| Bobcat Auger Bit Extention 12″-48″ – 24-107 | $12.00
(4hr) | $12.00 | $60.00 | $180.00 | |
| Bobcat Auger Bit, 10″ – 24-104 | $12.00
(4hr) | $12.00 | $54.00 | $180.00 | |
| Bobcat Auger Bit, 12″ – 24-103 | $12.00
(4hr) | $12.00 | $54.00 | $180.00 | |
| Bobcat Auger Bit, 18″ – 24-102 | $18.00
(4hr) | $18.00 | | $54.00 | |
| Bobcat Auger Bit, 30″ – 24-106 | $24.00
(4hr) | $24.00 | $120.00 | $360.00 | |
| Bobcat Auger Bit, 6″ – 24-22 | $12.00
(4hr) | $12.00 | $54.00 | $300.00 |  |
| Bobcat Fork Attachemnt – 24-036 | $36.00
(4hr) | $48.00 | $240.00 | $720.00 |  |
| Bobcat Mini Excavator E32 24″ Bucket – 24-034 | $180.00
(4hr) | $222.00 | $1,110.00 | $2,220.00 |  |
| Bobcat Mini Excavator 328 16″ Bucket – 24-001 | $180.00
(4hr) | $216.00 | $1,050.00 | $3,150.00 |  |
| Bobcat S250 Wheeled Unit – 24-023 | $156.00
(4hr) | $216.00 | $1,080.00 | $3,240.00 |  |
| Bobcat S590 Wheeled Unit – 24-035 | $180.00
(4hr) | $240.00 | $1,200.00 | $3,600.00 |  |
| Bobcat T595 Track Unit – 24-033 | $180.00
(4hr) | $252.00 | $1,260.00 | $3,780.00 |  |
| Bobcat T64 Track Unit – 24-040 | $180.00
(4hr) | $252.00 | $1,260.00 | $3,720.00 | |
| Bobcat, Broom – 24-032 | $108.00
(4hr) | $108.00 | $540.00 | $1,620.00 |  |
| Bobcat, Brush Cutter 60″ – 24-101 | $72.00
(4hr) | $72.00 | $360.00 | $1,080.00 |  |
| Bobcat, Concrete Breaker – 24-022 | $78.00
(4hr) | $138.00 | $690.00 | $2,070.00 |  |
| Bobcat, Grapple Bucket – 24-031 | $72.00
(4hr) | $72.00 | $360.00 | $1,080.00 |  |
| Bobcat, Harley Power Rake Only – 24-017 | $108.00
(4hr) | $108.00 | $540.00 | $1,620.00 |  |
| Bobcat, Leveler – 24-202 | $48.00
(4hr) | $60.00 | $300.00 | $900.00 | |
| Buggy, Concrete, Wheeled Unit 16 Cu Ft – 12-081 | $84.00
(4hr) | $114.00 | $570.00 | $1,710.00 |  |
| Buggy, Mud/concrete, Track Unit Sidedump – 12-082 | $150.00
(4hr) | $216.00 | $1,080.00 | $3,240.00 | |
| Bull Float, Magnesium Ext 48″x8″ – 12-032 | $9.60
(2hr) | $9.60 | $48.00 | $144.00 |  |
| Carpet Dryer, Quiet High Intensity – 42-199 | $36.00
(4hr) | $42.00 | $210.00 | $630.00 |  |
| Cart, Frieght 6′ Long – 18-090 | $16.80 | $16.80 | $84.00 | $252.00 |  |
| Caulk & Adhesive Gun – 58-022 | $14.40
(2hr) | $14.40 | $72.00 | $216.00 |  |
| Caulk Gun, 28 Oz – 58-024 | $9.60
(4hr) | $9.60 | $48.00 | $144.00 |  |
| Chain, Binder – 20-004 | $6.00
(2hr) | $6.00 | $30.00 | $90.00 |  |
| Chain, Tow – 20-003 | $6.00
(2hr) | $6.00 | $30.00 | $90.00 |  |
| Chisel, Bull Point – 20-043 | $6.00
(2hr) | $6.00 | $30.00 | $90.00 |  |
| Chisel, Flat – 20-042 | $6.00
(2hr) | $24.00 | $120.00 | $360.00 |  |
| Come-a-long, 2 Ton – 20-006 | $12.00
(2hr) | $18.00 | $90.00 | $270.00 |  |
| Come-a-long, 3 Ton – 20-002 | $16.80
(2hr) | $21.60 | $108.00 | $324.00 |  |
| Compactor, Double Vib Rideon Dd-14s – 10-060 | $96.00
(2hr) | $174.00 | $870.00 | $2,610.00 |  |
| Compactor, Jumping Jack Toro – 10-080 | $48.00
(4hr) | $72.00 | $360.00 | $1,080.00 |  |
| Compactor, Plate 4 Hp – 10-010 | $36.00
(4hr) | $56.40 | $282.00 | $846.00 |  |
| Compactor, Plate Toro – 10-021 | $42.00
(4hr) | $66.00 | $330.00 | $990.00 |  |
| Concrete Block Saw Cut-n-break – 12-111 | $150.00
(2hr) | $180.00 | $780.00 | $2,340.00 |  |
| Concrete Brick Saw With Stand – 12-001 | $42.00
(2hr) | $90.00 | $450.00 | $1,350.00 |  |
| Concrete Broom, Finishing 36″ – 12-028 | $16.80
(8hr) | $16.80 | $50.40 | $151.20 |  |
| Concrete Paver & Brick Buster – 12-004 | $33.60
(2hr) | $45.60 | $228.00 | $684.00 |  |
| Concrete Power Screed, 12foot – 12-201 | $48.00
(2hr) | $57.60 | $288.00 | $864.00 |  |
| Concrete Power Screed, 6 Foot – 12-200 | $45.60
(2hr) | $54.00 | $270.00 | $810.00 |  |
| Concrete Rake – 12-080 | $14.40
(2hr) | $14.40 | $72.00 | $216.00 |  |
| Concrete Saw 6 Hp Gas Walk Behind – 12-002 | $42.00
(2hr) | $78.00 | $390.00 | $1,170.00 |  |
| Concrete Saw Electric, Hitachi Cc12v – 12-113 | $21.60
(2hr) | $28.80 | $144.00 | $432.00 |  |
| Concrete Saw Partner K950 – 12-112 | $37.20
(2hr) | $54.00 | $270.00 | $810.00 |  |
| Concrete Saw, Ics 613gs – 12-114 | $360.00
(2hr) | $360.00 | $1,800.00 | $5,400.00 |  |
| Concrete Saw, Stihl – 12-116 | $38.40
(2hr) | $57.60 | $288.00 | $864.00 |  |
| Concrete Vibrator Internal – 12-205 | $54.00
(4hr) | $54.00 | $270.00 | $810.00 |  |
| Concrete, 2″ Core Req’s 12-100-01 – 12-101 | $48.00
(2hr) | $48.00 | $222.00 | $666.00 |  |
| Concrete, 2-1/2″ Core Req’s 12-100-01 – 12-102 | $48.00
(2hr) | $48.00 | $240.00 | $720.00 |  |
| Concrete, 3″ Core Req’s 12-100-01 – 12-103 | $54.00
(2hr) | $54.00 | $270.00 | $810.00 |  |
| Concrete, 3-1/2″ Core Req’s 12-100-01 – 12-104 | $60.00
(2hr) | $60.00 | $300.00 | $900.00 |  |
| Concrete, 4″ Core, Req’s 12-100-01 – 12-105 | $74.40
(2hr) | $74.40 | $372.00 | $1,116.00 |  |
| Concrete, Curing Blanket 12×20 – 12-206 | $18.00
(4hr) | $18.00 | $54.00 | $120.00 |  |
| Concrete, Curing Blanket 12×24 – 12-207 | $19.20
(4hr) | $19.20 | $56.40 | $126.00 |  |
| Concrete, Edco Single Disc Grinder – 12-300 | $72.00
(2hr) | $72.00 | $360.00 | $1,080.00 |  |
| Concrete, Edco Vacuum System – 12-301 | $84.00
(4hr) | $102.00 | $510.00 | $1,530.00 |  |
| Concrete, Power Screed W/out Bar – 12-199 | $48.00
(4hr) | $57.60 | $294.00 | $900.00 | |
| Concrete,drill Hand Held For Core Bits – 12-100 | $45.60
(2hr) | $54.00 | $240.00 | $720.00 |  |
| Cone, Orange Caution – 10-101 | $0.60
(2hr) | $0.60 | $3.00 | $9.00 |  |
| Cooler, Way Cool – 42-100 | $66.00
(4hr) | $90.00 | $312.00 | $936.00 |  |
| Cord, 50′ 10/3 Extension Yellow – 28-046 | $4.80
(2hr) | $4.80 | $24.00 | $72.00 |  |
| Cord, 50′ 12/3 Extension Blue – 28-045 | $4.80
(2hr) | $4.80 | $24.00 | $72.00 |  |
| Core Drill 1″ Bit – 12-035 | $30.00
(8hr) | $30.00 | $120.00 | $360.00 | |
| Core Drill 2″ Bit – 12-036 | $33.60
(8hr) | $33.60 | $144.00 | $432.00 | |
| Core Drill 3″ Bit – 12-037 | $33.60
(8hr) | $33.60 | $168.00 | $624.00 | |
| Core Drill 4″ Bit – 12-039 | $36.00
(8hr) | $36.00 | $180.00 | $540.00 | |
| Core Drill 5″ Bit – 12-042 | $38.40
(24hr) | $38.40 | $192.00 | $576.00 | |
| Core Drill Combo Rig Concrete – 12-034 | $60.00
(8hr) | $60.00 | $300.00 | $900.00 | |
| Dehumidifier, 80pt Drieaz – 42-200 | $60.00
(4hr) | $60.00 | $300.00 | $900.00 |  |
| Dingo Tx427 Narrow Track – 24-060 | $150.00
(4hr) | $180.00 | $900.00 | $2,700.00 |  |
| Dingo, Auger Attch. Only – 24-061 | $60.00
(4hr) | $60.00 | $300.00 | $900.00 |  |
| Dingo, Bucket Narrow – 24-064 | $24.00
(4hr) | $24.00 | $120.00 | $360.00 | |
| Dingo, Bucket, Wide Material – 24-062 | $24.00
(2hr) | $24.00 | $120.00 | $360.00 |  |
| Dingo, Forks – 24-605 | $24.00
(4hr) | $24.00 | $120.00 | $360.00 |  |
| Dingo, Trencher Attach Only 48″ 4″ Wide – 24-063 | $60.00
(4hr) | $60.00 | $300.00 | $900.00 |  |
| Ditch Witch Sk1050 – 24-065 | $180.00
(4hr) | $240.00 | $1,200.00 | $3,600.00 | |
| Dolly, Appliance – 18-026 | $12.00
(2hr) | $12.00 | $60.00 | $180.00 |  |
| Dolly, Carpeted, 18″x30″ – 18-012 | $9.60
(2hr) | $9.60 | $48.00 | $144.00 |  |
| Dolly, Platform, 18″x30″ – 18-024 | $9.60
(2hr) | $9.60 | $48.00 | $144.00 |  |
| Dolly, Platform, 18″x30″ – 18-015 | $9.60
(2hr) | $9.60 | $48.00 | $144.00 |  |
| Dolly, Two Wheel – 18-027 | $9.60
(5hr) | $9.60 | $48.00 | $144.00 |  |
| Door Lock Instalation 9 Pc Kit – 20-050 | $28.80
(2hr) | $28.80 | $144.00 | $432.00 |  |
| Drill Bit Kit, Hole Hawg, 8 Piece – 20-034 | $4.80
(2hr) | $4.80 | $24.00 | $72.00 |  |
| Drill Bit, Carbide Core 4″ – 20-044 | $12.00
(2hr) | $12.00 | $60.00 | $180.00 |  |
| Drill Bit, Sds Shank, Concrete 1 1/2″ – 20-030 | $6.00
(2hr) | $6.00 | $30.00 | $90.00 |  |
| Drill Bit, Sds Shank, Concrete 1 1/4″ – 20-041 | $6.00
(2hr) | $6.00 | $30.00 | $90.00 |  |
| Drill Bit, Sds Shank, Concrete 1 1/8″ – 20-039 | $6.00
(2hr) | $6.00 | $30.00 | $90.00 |  |
| Drill Bit, Sds Shank, Concrete 1″ – 20-038 | $6.00
(2hr) | $6.00 | $30.00 | $90.00 |  |
| Drill Bit, Sds Shank, Concrete 1/2″ – 20-012 | $6.00
(2hr) | $6.00 | $30.00 | $90.00 |  |
| Drill Bit, Sds Shank, Concrete 3/4″ – 20-036 | $6.00
(2hr) | $6.00 | $30.00 | $90.00 |  |
| Drill Bit, Sds Shank, Concrete 5/8″ – 20-058 | $6.00
(2hr) | $6.00 | $30.00 | $90.00 |  |
| Drill Bit, Sds Shank, Concrete 7/8″ – 20-037 | $6.00
(2hr) | $6.00 | $30.00 | $90.00 |  |
| Drill, 1/2″ Right Angle Magnum – 20-027 | $16.80
(2hr) | $24.00 | $120.00 | $360.00 |  |
| Drill, 1/2″ Reversible – 20-020 | $18.00
(2hr) | $18.00 | $90.00 | $270.00 |  |
| Drill, 3/8 Millwuakee – 20-023 | $12.00
(2hr) | $12.00 | $60.00 | $180.00 |  |
| Drill, Close Qtrs/cabinet – 20-201 | $12.00
(2hr) | $24.00 | $120.00 | $360.00 |  |
| Drill, Hammer 1/2″ Vsr – 20-010 | $21.60
(2hr) | $21.60 | $108.00 | $324.00 |  |
| Drill, Hole Hawg Rev 1/2″ – 20-032 | $15.60
(2hr) | $24.00 | $120.00 | $360.00 |  |
| Drywall Cart – 20-022 | $18.00
(4hr) | $25.20 | $126.00 | $378.00 |  |
| Drywall Jack Extention – 18-021 | $2.40
(5hr) | $6.00 | $30.00 | $90.00 |  |
| Drywall Jack, 10′-6″ Hght – 18-020 | $26.40
(4hr) | $40.80 | $204.00 | $612.00 |  |
| Drywall Tyrex Screw Gun – 26-018 | $14.40
(2hr) | $25.20 | $126.00 | $378.00 |  |
| Drywall, Milwaukee Screw Gun – 26-019 | $26.40
(4hr) | $38.40 | $180.00 | $360.00 |  |
| Fan, 36″ Mobile Versa-kool – 42-026 | $13.20
(2hr) | $26.40 | $132.00 | $396.00 |  |
| Fan, Misting Cool Draft – 42-027 | $60.00
(4hr) | $78.00 | | $1,170.00 | |
| Floor Chisel, Tile Remover – 12-120 | $57.60
(2hr) | $57.60 | $288.00 | $864.00 |  |
| Forearm Lifts – 18-039 | $14.40
(8hr) | $14.40 | $72.00 | $216.00 | |
| Generator, Generac 7000w – 28-001 | $60.00
(2hr) | $114.00 | $570.00 | $1,530.00 |  |
| Generator, Honda Eu2000 – 28-101 | $36.00
(4hr) | $60.00 | $300.00 | $900.00 |  |
| Generator, Honda Eu2200 – 28-102 | $36.00
(4hr) | $60.00 | $300.00 | $900.00 | |
| Generator, Rgv 4100 Va – 28-100 | $60.00
(2hr) | $102.00 | $510.00 | $1,530.00 |  |
| Grinder, Disc 4-1/2″ Dewalt – 30-010 | $22.80
(2hr) | $22.80 | $120.00 | $360.00 |  |
| Hammer Tacker, Bostich – 26-035 | $12.00
(2hr) | $12.00 | $48.00 | $144.00 |  |
| Hammer, Scrapper 6″ Wide – 20-051 | $24.00
(2hr) | $24.00 | $120.00 | $360.00 |  |
| Hammer,rotary 8a W/case – 20-035 | $50.40
(8hr) | $50.40 | $252.00 | $756.00 |  |
| Heat Gun – 58-023 | $14.40
(2hr) | $14.40 | $72.00 | $216.00 |  |
| Heater, 35,000 Btu Reddy Heater Propane – 42-105 | $26.40
(4hr) | $26.40 | $132.00 | $396.00 | |
| Heater, Elaectric 240 Volt 30,700btu – 42-113 | $48.00
(4hr) | $48.00 | $240.00 | $720.00 | |
| Heater, Patio, Zubria – 42-603 | $45.60
(4hr) | $69.60 | $348.00 | $1,044.00 |  |
| Heater, Propane Blp100 – 42-101 | $31.20
(2hr) | $31.20 | $151.20 | $450.00 |  |
| Heater, Propane Blp155at – 42-102 | $33.60
(2hr) | $33.60 | $168.00 | $504.00 |  |
| Heater, Propane Tc275j – 42-103 | $28.80
(2hr) | $28.80 | $144.00 | $432.00 |  |
| Heater, Table Top Propane – 42-602 | $57.60
(6hr) | $57.60 | $288.00 | $864.00 |  |
| Hole Saw Kit, 13 Pc – 20-200 | $24.00
(2hr) | $24.00 | $120.00 | $360.00 |  |
| Hole Saw, 2-1/8 – 20-089 | $8.40
(2hr) | $8.40 | $42.00 | $126.00 |  |
| Hole Saw, 3″, Milwaukee – 20-276 | $8.40
(2hr) | $8.40 | $42.00 | $126.00 |  |
| Hole Saw, 4″ – 20-090 | $9.60
(2hr) | $9.60 | $48.00 | $144.00 |  |
| Hole Saw, 5″ – 20-203 | $18.00
(2hr) | $18.00 | $90.00 | $270.00 |  |
| Hole Saw, 6″ Wood – 20-204 | $21.60 | $21.60 | $108.00 | $324.00 |  |
| Hole Saw, Milwaukee 4-1/8″ Holesaw – 20-202 | $7.20
(2hr) | $7.20 | $36.00 | $108.00 |  |
| Hole, Knockoput Punch, 2″ – 20-406 | $24.00
(4hr) | $24.00 | $120.00 | $360.00 | |
| Hole, Knockou Punch, 1″ – 20-403 | $14.40
(4hr) | $14.40 | $72.00 | $216.00 | |
| Hole, Knockout Punch 1/2″ – 20-401 | $12.00
(4hr) | $12.00 | $60.00 | $180.00 | |
| Hole, Knockout Punch 3/4″ – 20-402 | $12.00
(4hr) | $12.00 | $60.00 | $180.00 | |
| Hole, Knockout Punch, 1-1/2″ – 20-405 | $18.00
(4hr) | $18.00 | $54.00 | $162.00 | |
| Hole, Knockout Punch, 1-1/4″ – 20-404 | $18.00
(4hr) | $18.00 | $90.00 | $270.00 | |
| Holesaw, 1-3/8″ Tile Cutter – 20-215 | $9.60
(2hr) | $9.60 | $48.00 | $144.00 |  |
| Holesaw, 2″ Tile Cutter – 20-220 | $10.80
(2hr) | $10.80 | $54.00 | $162.00 |  |
| Holesaw, 3/4″ Tile Cutter – 20-210 | $8.40
(2hr) | $8.40 | $42.00 | $126.00 |  |
| Hose, Air 3/4 X 50′ – 02-100 | $9.60
(2hr) | $9.60 | $48.00 | $144.00 |  |
| Hose, Air 3/4 X 75′ – 02-110 | $12.00
(2hr) | $12.00 | $60.00 | $180.00 |  |
| Hose, Garden, 50 Foot – 02-111 | $6.00 | $6.00 | $30.00 | $90.00 |  |
| Impact Driver, Dewalt 1/2″ Cordless 20 V – 20-101 | $21.60
(2hr) | $36.00 | $132.00 | $396.00 |  |
| Insulation Blower – 58-100 | $48.00
(4hr) | $66.00 | $330.00 | $810.00 |  |
| Jack – 20-275 | $6.00
(2hr) | $6.00 | $30.00 | $180.00 |  |
| Jack Hammer Bits – 12-098 | (2hr) | | | |  |
| Jack Hammer, Brute – 12-090 | $72.00
(4hr) | $108.00 | $540.00 | $1,620.00 | |
| Jack Hammer, Hilti Te2000 – 12-089 | $72.00
(4hr) | $96.00 | $540.00 | $1,620.00 | |
| Jack Hammer, Hilti Te3000 – 12-097 | $90.00
(4hr) | $120.00 | $600.00 | $18,000.00 |  |
| Jack Hammer, Hitachi – 12-099 | $72.00
(4hr) | $108.00 | $540.00 | $1,620.00 |  |
| Kubota, 60″ Tiller – 24-008 | $78.00
(4hr) | $120.00 | $600.00 | $1,800.00 |  |
| Kubota, Box Blade Only – 24-010 | $108.00
(8hr) | $108.00 | $540.00 | $1,620.00 | |
| Kubota, Mower Only – 24-007 | $48.00
(4hr) | $90.00 | $450.00 | $1,350.00 | |
| Kubota, Seeder Only, 3 Pt 48″ – 24-009 | $78.00
(3hr) | $120.00 | $600.00 | $1,800.00 |  |
| Kubota, Tractor With Loader – 24-003 | $120.00
(3hr) | $174.00 | $870.00 | $2,610.00 |  |
| Kubota, With 60″ Tiller – 24-004 | $144.00
(3hr) | $240.00 | $1,200.00 | $3,600.00 |  |
| Kubota, With Box Blade – 24-006 | $132.00
(3hr) | $240.00 | $1,200.00 | $3,600.00 |  |
| Kubota, With Seeder Attachment – 24-005 | $144.00
(3hr) | $240.00 | $1,200.00 | $3,600.00 |  |
| Machine Skates – 18-050 | $26.40
(2hr) | $26.40 | $132.00 | $396.00 |  |
| Magnet On A Stick – 29-046 | $7.20
(4hr) | $9.60 | $48.00 | $144.00 |  |
| Magnetic Nail Catcher – 29-045 | $12.00
(2hr) | $12.00 | $60.00 | $180.00 |  |
| Metal Detector – 34-056 | $24.00
(2hr) | $30.00 | $150.00 | $450.00 |  |
| Metal State Finder (magnetic Locator) – 34-057 | $30.00
(2hr) | $45.60 | $228.00 | $684.00 |  |
| Mixer, Concrete 6cf 8hp Tow – 12-061 | $60.00
(8hr) | $60.00 | $300.00 | $900.00 |  |
| Mixer, E-z Wheel 1-1/2cf Cement 1/3hp – 12-021 | $19.20
(2hr) | $25.20 | $126.00 | $378.00 |  |
| Mortar Box, 9 Cf – 12-180 | $7.20
(2hr) | $7.20 | $36.00 | $108.00 |  |
| Mortar Hoe (2 Hole),10″ Blade – 12-017 | $16.80
(8hr) | $16.80 | $84.00 | $252.00 |  |
| Mud Mixer – 12-181 | $7.20
(2hr) | $7.20 | $36.00 | $108.00 |  |
| Nailer, 18 Guage Harwood Floor – 26-030 | $33.60
(2hr) | $33.60 | $168.00 | $504.00 |  |
| Nailer, 20 Guage Laminated Floor Stapler – 26-029 | $33.60
(2hr) | $33.60 | $168.00 | $504.00 |  |
| Nailer, Coil Siding Bostich – 26-043 | (4hr) | | | | |
| Nailer, Finish 15 Gauge Pneumatic – 26-038 | $33.60
(2hr) | $33.60 | $168.00 | $504.00 |  |
| Nailer, Finish 16 Gauge Bostich – 26-049 | $33.60
(4hr) | $33.60 | $168.00 | $504.00 |  |
| Nailer, Finish 18 Gauge Pneumatic Oiless – 26-040 | $33.60
(2hr) | $33.60 | $168.00 | $504.00 |  |
| Nailer, Flooring Nailer, Angle & Face – 26-028 | $33.60
(2hr) | $33.60 | $168.00 | $504.00 |  |
| Nailer, Flooring Pneumatic (kit) – 26-260 | $33.60
(2hr) | $33.60 | $168.00 | |  |
| Nailer, Flooring Porta – 26-360 | $36.00
(4hr) | $36.00 | $168.00 | $504.00 | |
| Nailer, Flooring, Manual, Angle Only – 26-025 | $28.80
(2hr) | $28.80 | $144.00 | $432.00 |  |
| Nailer, Framing Coil Pneumatic – 26-056 | $33.60
(2hr) | $33.60 | $168.00 | $504.00 |  |
| Nailer, Framing Stick Pneumatic – 26-050 | $33.60
(2hr) | $33.60 | $168.00 | $504.00 |  |
| Nailer, Hardwood Floor Stapler – 26-031 | $33.60
(2hr) | $33.60 | $168.00 | $504.00 |  |
| Nailer, Remington Power 22 Caliber – 26-500 | $14.40
(2hr) | $14.40 | $72.00 | $216.00 |  |
| Nailer, Roofing Coil Pneumatic – 26-044 | $33.60
(2hr) | $33.60 | $168.00 | $504.00 |  |
| Nailer/stapler 1/4″ Narrow Crown Sub Flo – 29-038 | $33.60
(2hr) | $33.60 | $168.00 | $504.00 |  |
| Nailer/stapler Roof Pneumatic – 26-039 | $33.60
(2hr) | $33.60 | $168.00 | $504.00 |  |
| Paint Sprayer Hose 50′ X 1/4″ – 58-051 | $9.60
(2hr) | $9.60 | $48.00 | $144.00 |  |
| Paint Sprayer, Airless 2500 – 58-035 | $180.00 | $180.00 | $780.00 | $2,340.00 |  |
| Paint Sprayer, Electric Parking Lot Str – 58-036 | $180.00
(2hr) | $180.00 | $900.00 | $2,700.00 |  |
| Paint Stripper, Parking Lot – 58-009 | $16.80
(8hr) | $16.80 | $84.00 | $252.00 |  |
| Pallet Jack, 5000 Capacity – 18-038 | $26.40
(2hr) | $26.40 | $132.00 | $396.00 |  |
| Piano Dolly (two Pieces) – 18-018 | $22.80
(8hr) | $22.80 | $114.00 | $342.00 |  |
| Plasma Cutter – 28-005 | $62.40
(2hr) | $62.40 | $312.00 | $936.00 |  |
| Propane Tank, 100lb – 42-108 | $12.00
(2hr) | $12.00 | $60.00 | $180.00 |  |
| Propane Tank, 20lb – 42-109 | $9.60
(2hr) | $9.60 | $48.00 | $144.00 |  |
| Propane Tank, 30lb – 42-111 | $9.60
(2hr) | $9.60 | $48.00 | $144.00 |  |
| Propane Tank, 40lb – 42-112 | $10.80
(2hr) | $10.80 | $54.00 | $162.00 |  |
| Ramp, Fiberglass 7-1/2×26 – 18-013 | $18.00
(2hr) | $18.00 | $90.00 | $270.00 |  |
| Router, 2hp Electric, Milwuakee – 20-029 | $34.80
(8hr) | $34.80 | $150.00 | $450.00 |  |
| Sand Blaster, Double Pot – 10-200 | $48.00
(4hr) | $48.00 | $240.00 | $720.00 | |
| Sign Holder, Plastic 24″x45 – 10-102 | $18.00
(2hr) | $18.00 | $90.00 | $270.00 |  |
| Stencil, Handicap – 58-012 | $6.00
(2hr) | $6.00 | $30.00 | $90.00 |  |
| Stencil, No Parking – 58-014 | $6.00
(2hr) | $6.00 | $30.00 | $90.00 |  |
| Stencil, Visitor – 58-015 | $6.00
(2hr) | $6.00 | $30.00 | $90.00 |  |
| Tamper, 10 X 10 – 10-018 | $12.00
(8hr) | $12.00 | $60.00 | $180.00 |  |
| Texture Gun Hopper – 58-020 | $18.00
(2hr) | $18.00 | $90.00 | $270.00 |  |
| Texture Knock Down Blade – 58-030 | $14.40
(4hr) | $14.40 | $72.00 | $216.00 | |
| Texture Spray Unit W/gun Hopper – 58-019 | $27.60
(2hr) | $38.40 | $192.00 | $576.00 |  |
| Tile Holesaw 1″ – 20-305 | $15.60
(2hr) | $15.60 | $78.00 | $234.00 |  |
| Tile Holesaw 1-3/8″ – 20-306 | $15.60
(2hr) | $15.60 | $78.00 | $234.00 |  |
| Tile Holesaw 1/2″ X 5/8″ – 20-303 | $13.20
(2hr) | $13.20 | $66.00 | $198.00 |  |
| Tile Holesaw 2″ – 20-307 | $15.60
(2hr) | $15.60 | $78.00 | $234.00 |  |
| Tile Holesaw 3″ – 20-308 | $24.00
(2hr) | $24.00 | $120.00 | $360.00 |  |
| Tile Holesaw 3/4″ X 5/8″ – 20-304 | $15.60
(2hr) | $15.60 | $78.00 | $234.00 |  |
| Tile Holesaw 3/8″ X 5/8″ – 20-302 | $12.00
(2hr) | $12.00 | $60.00 | $180.00 |  |
| Tile Holesaw 4″ – 20-309 | $24.00
(2hr) | $24.00 | $120.00 | $360.00 |  |
| Tile Holesaw 5/16″ X 5/8″ – 20-301 | $12.00
(2hr) | $12.00 | $60.00 | $180.00 |  |
| Torch, Small Does Not Include Tanks – 28-051 | $36.00
(4hr) | $54.00 | $270.00 | $810.00 |  |
| Trencher 24″x3″ – 24-026 | $66.00
(4hr) | $96.00 | $480.00 | $1,440.00 |  |
| Trencher Vermeer Rt450 W/backhoe – 24-038 | $240.00
(4hr) | $360.00 | $1,800.00 | $5,400.00 |  |
| Trencher, Track Walk Behind,48″x6″ – 24-027 | $144.00
(4hr) | $216.00 | $1,080.00 | $3,240.00 |  |
| Trencher, Walk Behind 48″ Deep, 6″ Wide – 24-025 | $96.00
(4hr) | $144.00 | $720.00 | $2,160.00 |  |
| Trowel, 3″x16″ Mag Finish – 12-040 | $9.60
(4hr) | $9.60 | $48.00 | $144.00 | |
| Trowel, Concrete 12″ X 4″ – 12-038 | $4.80
(2hr) | $4.80 | $24.00 | $72.00 |  |
| Trowel, Power 36″ 5.5 Hp – 12-007 | $48.00
(2hr) | $78.00 | $390.00 | $1,170.00 |  |
| Wallpaper Perforator Roller – 58-011 | $2.40
(2hr) | $2.40 | $12.00 | $36.00 |  |
| Wallpaper Scraper W/12″ Handle – 58-008 | $4.80
(2hr) | $4.80 | $24.00 | $72.00 |  |
| Wallpaper Steamer, Elec – 58-013 | $14.40
(2hr) | $22.80 | $114.00 | $342.00 |  |
| Welder, Mig 115 Volt – 28-050 | $66.00
(2hr) | $66.00 | $330.00 | $990.00 |  |
| Xxxloader/backhoe Terex, 90hp Desiel – 24-100 | $360.00 | $360.00 | $1,800.00 | $5,400.00 |  |
Printable Price List